EXFO RTU 310-310G IP Services Test Head - Manual (Page 509)

Pop-Up Windows
Ethernet and Fibre Channel Application 497
Service Profile Configuration
Service Profile Configuration
This pop-up window is only available with EtherSAM (Y.1564) test case.
Service profile allows the selection and configuration of the Voice, Video,
or Data service profile. The default setting is Data. There is no parameter to
set for Data.
For Voice:

Voice Codec choices are VoIP G.711, VoIP G.723.1, and VoIP
G.729. The default setting is VoIP G.711.

Nb Calls allows the selection of the equivalent number of calls that
will be generated for the selected stream. The default setting is 1.

CIR indicates the committed information rate in Mbps according
with the number of call selected.
For Video:

Video Codec choices are SDTV (MPEG-2), HDTV (MPEG-2), and
HDTV (MPEG-4). Only SDTV (MPEG-2) is available with the
10 Mbps interface. The default setting is SDTV (MPEG-2).

Nb Channels allows the selection of the equivalent number of
channels that will be generated for the selected stream. The
default setting is 1.

CIR indicates the committed information rate in Mbps according
with the number of channel selected.