EXFO RTU 310-310G IP Services Test Head - Manual (Page 139)

Summary Tabs
Ethernet and Fibre Channel Application 127
Test Summary

On/Off button allows enabling the test timer. An error message is
displayed and the test timer is not enabled when the provided start
time or stop time is not valid. It is not possible to enable the test timer
while the test is running. When the timer is enabled (On), it is possible
to disable it even when the test is running. This setting is disabled (Off)
by default.
When test timer is enabled, it is possible to manually stop a test case
using the main test case Stop button. However, it is not possible to start
the test case when the Start Time is enabled.
The test timer is automatically disabled either when the user manually
stops the test, or when the given stop time or duration has expired.
Note: When using Visual Guardian Lite for remote control, the timer
configuration values will be based on the PC clock and not on the
RTU-310/310G. Make sure to consider the time zone differential if it exists
between the PC and the RTU-310/310G.
Alarm Analysis
LOC indicates that the RTU-310G is unable to synchronize with the
selected test clock.
Test Preferences
Couple Start/Enable TX allows to automatically enable the stream
transmission when the test is started. The stream transmission stops when
the test is stopped. This setting is disabled by default. Refer to Enable TX -
On/Off button on page 164 for more information.