beautypg.com

Ping configuration, Setup – EXFO RTU 310-310G IP Services Test Head User Manual

Page 424

background image

Tools Tabs

412

FTB-8500 Series and FTB-8120NGE/8130NGE

Ping Configuration

Ping Configuration

The Ping tool is used to determine if a network device is reachable. Ping is
not available when no test is created

Click Tools, Ping, Configuration, and in the Tool list, click Ping.

Note: For Trace Route, see Trace Route Configuration on page 417.

Setup

IP Address/IPv6 Address: Enter the IP address of the network device
to be detected. The IP address version is as per the version selected
during the test setup.

Run: Click Run to start the Ping command.

Configuration

Timeout (ms): Enter the maximum time allowed between an ICMP
echo and response. Choices are 200 ms to 10000 ms. The default
setting is 4000 ms.