EXFO RTU 310-310G IP Services Test Head - Manual (Page 33)

Getting Started
Ethernet Test Module 21
Turning the Unit On
7. Connect the other end of wires to the DC power source.
8. To add a redundant DC source on the RTU-310/310G, repeat steps 5
to 7.
Turning the Unit On
To turn the unit on:
Connect the RTU-310/310G to a live AC or DC power source.
Note: The RTU unit must be connected to monitor and keyboard before switching
it on.
An LED sequence is displayed on the RTU-310/310G front panel
indicating the booting process. Once powered up, the
POWER/STANDBY LED turns on indicating that the RTU-310/310G is
ready to be used.
Automatic Power Failure Recovery
In the case of a power failure, the RTU-310/310G unit will recover
automatically when the power is restored. The RTU-310/310G unit will
return to the same state as before the power failure.
C
AUTION
The DC input feeds to the equipment must be protected by 20A
rated maximum breaker provided as part of the building
installation.