EXFO RTU 310-310G IP Services Test Head User Manual

Page 111

Text mode
Original mode

Creating and Starting a Test Case

Ethernet and Fibre Channel Application

Ethernet BERT Test Case

4b. For Ethernet Unframed, select the

Enable Sync check box to allow any
receiver to bit-sync every second by
inserting an IFG of 12 bytes with
SOF. The Enable Sync check box is
not selected by default.

4c. Set the Auto-Negotiation, Speed,

Duplex, and Flow Control
parameters. Not available with
Ethernet 10G. Refer to Interface
Setup (Ethernet) on page 142 for
more information.

4d. Set the IP Version (IPv4 or IPv6). IP

Version is only available with
Framed Layer 2 when the IPv6 software option (SK-IPV6) is
enabled.

4e. Click Next.