Connecting the management interfaces, Connecting the ethernet craft port – EXFO RTU 310-310G IP Services Test Head User Manual

Page 40

Getting Started

RTU-310/310G

Connecting the Management Interfaces

Connecting the Management Interfaces

Connecting the Ethernet CRAFT Port

Connecting a PC to the Ethernet CRAFT port is required to access the user
interface and configure the RTU-310/310G the very first time.

Note: The CRAFT port is for access using a Static configured IP.

To connect locally to the RTU-310/310G using the CRAFT port:

Connect a PC (running the Ex-Vu application) to the CRAFT port using
a standard straight through Ethernet cable with an RJ-45 connector.
Refer to Ethernet Cables on page 455 for more information.

The CRAFT port is configured with a static IP address 10.10.10.10. Local
connectivity (LAN IP Address, unit clock, etc.) to the unit is required to
configure the RTU-310/310G settings for the first time. Using Ex-Vu
connect locally to the RTU-310/310G provides you full access to all the
test and configuration functions to the unit. Refer to To log on to the
RTU-310/310G interface using SUI: on page 37, for more information.

For RTU-310

For RTU-310G

10/100 Mbps Ethernet CRAFT Port