EXFO RTU 310-310G IP Services Test Head - Manual (Page 319)

RFC 2544 Tabs
Ethernet and Fibre Channel Application 307
Back-to-Back

Current Trial: Indicates the current trial number.

Unit: Select the throughput result unit. Choices are bps, Bps,
Kbps, KBps, Mbps, MBps, Gbps, GBps, fps, %, Bytes/Burst, and
Frames/Burst. Default unit is Frames/Burst.

Layer: Select the layers used for the Back-to-Back test. Choices are
Layer 1,2,3, Layer 2,3, and Layer 3. The default setting is Layer
1,2,3.
Layer 1,2,3 contains the Idle, Preamble, Start of Frame Delimiter,
MAC address, IP address, and data.
Layer 2,3 contains the MAC layer, IP layer, and data.
Layer 3 contains the IP layer, and data.

Displayed Results: Select the displayed result mode: Current,
Minimum, Maximum, or Average. The default setting is Current.