beautypg.com

Arning – EXFO RTU 310-310G IP Services Test Head User Manual

Page 31

background image

Getting Started

Ethernet Test Module

19

Connecting the Power

To connect the RTU-310/310G to a DC power source:

1. Remove the two Phillips flat screws, and remove the ground lug on the

back panel of the RTU-310/310G unit.

2. Use a #6 AWG wire (not supplied) insert the wire into the lug and

crimp it.

3. Use the two Phillips flat screws to attach the ground lug and wire

assembly to the rear panel of the RTU-310/310G unit.

4. Connect the other end to the ground distribution network.

W

ARNING

The RTU-310/310G DC version is intended to be grounded. Ensure
that the unit is connected to earth ground during normal use.

Ground lug