EXFO RTU 310-310G IP Services Test Head - Manual (Page 438)

Tools Tabs
426 FTB-8500 Series and FTB-8120NGE/8130NGE
802.3ah Configuration
802.3ah Configuration
Note: The 802.3ah Config tab is only available when 802.3ah is selected as the
ENIU type.
Click Tools, ENIU, and 802.3ah Config.
OAM Mode
The OAM Mode is set to Active mode and is not configurable. In Active
mode, the RTU-310/310G will initiate the discovery process and will not
respond to variable request and loopback command received.
Configuration

Destination MAC Address: A default Media Access Control (MAC)
address is given to the Ethernet port. The default 802.3ah multicast
destination MAC address is the standard 01:80:C2:00:00:02. Click the
Destination MAC Address field if the MAC address has to be changed
for this port and enter the new MAC address.
Enable allows editing the Destination MAC Address when the Enable
check box is selected. The destination MAC address returns to its
default (01:80:C2:00:00:02) when the Enable check box is cleared.