EXFO RTU 310-310G IP Services Test Head - Manual (Page 406)

System Tabs
394 RTU-310/310G
RTU Setup

Default Gateway: Sets the Default Gateway for the LAN Interface
port.If Automatic IP Address is selected, it displays the granted
Default Gateway. The default value is blank.

Acquired Server Address: Displays the current DHCP server address
value.

Lease Obtained: Displays the current DHCP lease obtained value.

Lease Expires: Displays the current DHCP lease expiry value.
User Information
The User Information field allows a user to leave a message to other users
when they connect to the same unit. When a new user logs in to the
RTU-310/310G, a dialog box is displayed notifying any change in the User
Information field. A maximum of 80 characters are allowed.
Device Description
The Device Description field allows to enter specific device information.
Typical information can include device name, location, contact number,
etc. A maximum of 256 characters are allowed.
Date and Time

NTP Server IP Address: Sets the IP address of a Network Time
Protocol (NTP) server, the RTU-310/310G will synchronize its clock
according to the NTP protocol specification. If no NTP Server IP
Address is provided, you must set the date and time manually.

Contacted: Indicates that the connection to the NTP server is
established.

Not Contacted: Indicates that the NTP server is not reachable.

Blank: Indicates that no NTP server is defined.