EXFO RTU 310-310G IP Services Test Head - Manual (Page 113)

Creating and Starting a Test Case
Ethernet and Fibre Channel Application 101
Ethernet BERT Test Case
5g. Enter the Maximum Rate (%), the default setting is 100% for all
speeds except for 10Gbps WAN which is 92.3076923076923%.
Refer to Traffic Shaping on page 172 for more information.
5h. Click Next.
6. Pattern configuration:
6a. Set the pattern parameters. Refer to
Pattern TX on page 290 for more
information.
6b. Click Finish to complete the test setup.
The Alarm summary tab is
automatically displayed.
7. For additional configuration parameters,
refer to Stream Generation Tabs on page 161.
8. Click the Start button to start the test.
9. For additional results, refer to Traffic Analyzer Tabs on page 199 and
Pattern Tabs on page 289.