EXFO RTU 310-310G IP Services Test Head - Manual (Page 141)

Summary Tabs
Ethernet and Fibre Channel Application 129
Alarm Summary

Test
Global: Indicates the presence of any alarms/errors related to the test
such as Port, WIS, Ethernet, Pattern, High Layer Protocol, Fibre
Channel, and Other. Fibre Channel is not available with RTU-310G.
Log Full: Indicates that the logger exceeds it maximum capacity of
5000 events.

Port: Indicates the presence of any alarms/errors related to the
physical port such as LOS, Frequency, and LOC (Ethernet 10G WAN).
Also indicates port power measurement Pwr (dBm)for optical port,
frequency Freq (bps), and Offset (ppm)for all interfaces at the
exception of 10 Mbps.

WIS: Indicates the presence of any alarms/errors related to Ethernet
10G WAN testing such as Section/RS (B1, LOF or SEF), Line/MS (B2,
REI-L, AIS-L, or RDI-L), High Order Path (B3, REI-P, AIS-P, RDI-P,
LCD-P, LOP-P, PLM-P, UNEQ-P, ERDI-PSD, ERDI-PCD, or ERDI-PPD),
and WIS Link. WIS is not available with RTU-310.

Ethernet: Indicates the presence of any alarms/errors related to
Ethernet testing such as Errors (FCS, Jabber, Runt, Oversize when
enabled (refer to Oversize Monitoring on page 203), Undersize, Idle,
Symbol, Collisions, Alignment, False Carrier, Out-of-sequence, or
Frame Loss), LinkIdle, Symbol, Collisions, Alignment, and False
Carrier are not available with RTU-310G. Block Error and Fault are not
available with RTU-310.

Fibre Channel: Indicates the presence of any alarms/errors related to
the Fibre Channel testing such as Errors (FCS, Oversize, Undersize,
Symbol), and Link. Not available with RTU-310G.