EXFO RTU 310-310G IP Services Test Head - Manual (Page 450)

Tools Tabs
438 FTB-8500 Series and FTB-8120NGE/8130NGE
Traffic Scan

Filters
The column’s All/Ignore toggle buttons are used to set the filtering
criteria.
Only parameters set to All will be considered to identify each traffic
flow. The availability of filters depends on the VLAN or MPLS Level
selected.
Filtering on a VLAN ID requires that all VLAN IDs from the current up to
the outer VLAN are included in the filtering criteria. Filtering on a VLAN
Priority requires that its VLAN ID is included in the filtering criteria.
Note: Setting a VLAN ID to Ignore will automatically ignore its Priority and TPID
values.
Setting an MPLS ID to Ignore will automatically switch its COS’s filter to
Ignore.
Scan Level Filters
VLAN All and E-VLAN E-VLAN priority, S-VLAN ID and Priority, C-VLAN ID and Priority.
S-VLAN S-VLAN Priority, C-VLAN ID and Priority.
C-VLAN C-VLAN Priority.
Untagged Not applicable.
MPLS All and 2 Labels MPLS Label#2 COS, MPLS Label#1 ID and COS.
1 Label MPLS Label#1 COS
Unlabeled Not applicable.