KEYENCE SR-750 Series - Manual (Page 83)

83 E SR-750 UM
„ SNTP settings
Function
Command
Number
Setting
value
Explanation Default
Remote SNTP server
address
520 a. b. c. d
a : 0 to 255
b : 0 to 255
c : 0 to 255
d : 0 to 255
If 0.0.0.0 is set, the SNTP server is
not accessed.
0.0.0.0
Time zone 521 0 to 33
0 to 32
0 : GMT-12:00
1 : GMT-11:00
2 : GMT-10:00
3 : GMT-9:00
4 : GMT-8:00 PSD
5 : GMT-7:00
6 : GMT-6:00 CST, Mexico City,
Central America
7 : GMT-5:00 EST
8 : GMT-4:30
9 : GMT-4:00 AST
10 : GMT-3:30
11 : GMT-3:00 Brasilia
12 : GMT-2:00 Central Atlantic
13 : GMT-1:00
14 : GMT London, UTC
15 : GMT+1:00 Berlin, Brussels,
Rome, Paris, Berne
16 : GMT+2:00 Athens,
Jerusalem
17 : GMT+3:00 Kuwait
18 : GMT+3:30
19 : GMT+4:00 Moscow
20 : GMT+4:30
21 : GMT+5:00
22 : GMT+5:30 New Delhi
23 : GMT+5:45
24 : GMT+6:00
25 : GMT+6:30
26 : GMT+7:00 Bangkok
27 : GMT+8:00 Kuala Lumpur,
Singapore, Taipei, Beijing
28 : GMT+9:00 Japan, Seoul
29 : GMT+9:30
30 : GMT+10:00 Canberra,
Sydney
31 : GMT+11:00
32 : GMT+12:00
33 : GMT+13:00
28
Update cycle (min) 522 1 to 99 1
Batch transmission of setting/confirmation commands (WA/RA)
The SR-750 Series has the dedicated command that has been prepared for batch
transmission of multiple setting/confirmation commands (WB/RB, WC/RC, WP/RP,
WN/RN). Use this command to reduce the number of times to send setting
commands.
Batch transmission command format
Send the batch transmission command in the following formats.
• Configuration change
Send command
Response Normal process
Abnormal process
• Configuration confirmation
Send command
Response Normal process
Abnormal process
Setting command 1, Setting command 2 : Setting command type
Confirmation command 1, Confirmation command 2 : Confirmation command type
n
: Location where an error
occurs Head 1
Error command type : Type of command where an
error occurs
ee : Error code
• When using the batch transmission command, the reflecting order of the setting
is the same as the sending order of the setting commands.
• Make sure to send the SAVE command after sending the batch transmission
command containing the communication setting command.
• The batch transmission command can send up to 2048 bytes of number of
characters (excluding header and terminator).
• The location (n) of the error command returns the location first confirmed from
the head of the transmission command.
Each Setting/Confirmation Command Format
When using the batch transmission command, link each setting/confirmation
command in the following format after deleting W/R from each command.
„ Parameter bank configuration command
Change command
Confirmation command
Confirmation command response
bb : Parameter bank number 01 - 10 Fixed to 2 bytes
mmm : Command number Fixed to 3 bytes
nnn··· : Setting value (varies according to command
number)
„ Code configuration command for tuning
Change command
Confirmation command
Confirmation command response
A : Code setting number 1 to 8 1-byte Fixed to 1 byte
mm : Command number Fixed to 2 bytes
nnn··· : Setting value (changeable according to the
command number)
„ Operation configuration command
Change command
Confirmation command
Confirmation command response
mmm : Command number Fixed to 3 bytes
nnn··· : Setting value (varies according to command
number)
WA ,
Setting
command 1
,
Setting
command 2
, …
OK , WA
ER , WA , n ,
Error
command type
, ee
RA ,
Setting
command 1
,
Setting
command 2
, …
OK , RA ,
Confirmation
command 1 response
,
Confirmation
command 2 response
, …
ER , RA , n ,
Error
command type
, ee
B , bb mmm , nnn…
B , bb mmm
B , bb nnn…
C , A mm , nnn…
C , A mm
C , A nnn…
P , mmm , nnn…
P , mmm
P , nnn…