KEYENCE SR-750 Series - Manual (Page 49)

49 E SR-750 UM
5-5
Sending/Receiving Configuration
This section explains the transmission of a configuration between AutoID Network
Navigator and the SR-750 Series.
Sending Configuration to the SR-750 Series
1
Select the SR-750 Series unit registered in the reader list, and click
the
button.
2
When the transmission finishes with the message "Configuration
sent successfully.", the settings specified on the individual tabs
have been written to the SR-750 Series.
Important As the edit data function or the edit image file name function is
used, if "Use script" is enabled, the following window appears.
Receiving Configuration from the SR-750 Series
1
Select the SR-750 Series unit registered in the reader list, and click
the
button.
2
When the settings are received for the configuration file currently
being edited, the following message is displayed:
Click "Yes" to save the configuration file currently being edited, click
"No" to not save, or "Cancel" to cancel receiving the configuration.
3
When the reception finishes with the message "Configuration
retrieved successfully.", the configuration of the SR-750 Series have
been reflected on the tabs of AutoID Network Navigator.
5-6
Saving/Reading a
Configuration File
The specified settings can be saved as a configuration file or read from a
configuration file.
Saving a Configuration File
1
Select the SR-750 Series unit registered in the reader list, and click
the
button.
You can also save a configuration file from the "File", "Save", "Save As ", or
"Save All" commands in the menu bar.
2
When the "Save As" dialog box is displayed, enter the file name.
The file is saved with the "ptc" extension.
When the setting to use the edit data function or the edit image file name
function has been made, the message box to save the script file appears. Press
"Yes" to save the script file.
3
Click the "Save" button.
The configuration will be saved in the specified file.
Reading Configuration Files
1
Click the button.