KEYENCE SR-750 Series - Manual (Page 64)

64 E SR-750 UM
Appending Data
Various types of data can be appended to read data.
„ Read data format
The data format for appending various types of data to read data is shown below:
Delimiter characters
• The colon (:) as a delimiting character can be changed via AutoID Network
Navigator (one character).
• No delimiter character is inserted after "Data size" and "Symbol ID", and before
"Checksum".
Precautions when appending data
• Appended data can be set via a command or from AutoID Network Navigator.
• Only the selected data will be appended to the read data. The data size changes
because of this.
• Checksum defers by the contents of the appended data.
Details of Appended Data
„ Data size
The data size is the total size of parts (1), (2), and (3), plus 4 bytes.
„ Time
Appends the time the data was output.
Appended data range: YYYYMMDDhhmmss
• Data format
„ Read detailed error code
Factors that caused read errors are judged for each burst number.
The Read detailed error code is appended before the Read data.
n: Maximum value of the burst No.
• The detailed error code is appended starting with burst No. 1.
• The detailed error code is appended with the following contents.
„ Code type
The type of read code can be appended before the read data.
Data
size
Time :
Detail error
code
:
Code
type
:
Symbol
ID
Read
data
:
Parameter
bank
numbers
:
Burst
number
:
Scan
count
:
Positioning
level
:
Code vertex
coordinates
:
Code center
coordinates
:
Unused
ECC
ratio :
Matching
level
:
ISO/IEC15415
verification
result
:
ISO/IEC TR 29158
(AIM DPM-1-2006)
verification result
:
SAE AS9132
verification
result
:
SEMI T10-0701
verification
result
:
Image
file name
:
Group
name
:
Master/
Slave ID
:
Read
time
Check-
sum
YYYYMMDDhhmms : Read data
Burst number 1
detailed error code
:
Burst number 2
detailed error code
: … :
Burst number n
detailed error code
: Read data
Detailed error code Description
0 Reading success
1 No code
2 The set decode timeout period elapsed.
3 Scanning aborted.
9 Reading images failed.
Code type ID Read data
0 Reading error
1 QR
2 DataMatrix
5 GS1 DataBar
6 CODE39
7 ITF
9 NW-7(Codabar)
10 JAN/EAN/UPC
11 CODE128
(3) (2) (1)
Header Data size Read data + appended data
Termi-
nator
Checksum
„ Symbol ID
Appends the symbology identifier, specified by AIM, before the read data.
It is not appended when a reading has failed.
• Data format
„ Parameter bank number
Appends the parameter bank number that was read.
It is not appended when a reading fails.
• Data format
nn = parameter bank number (01 - 10)
„ Burst number
Outputs the burst number of the successfully read image in the burst read mode.
No data is appended for a failed reading.
This data is not appended in any mode other than the burst read mode.
• Data format
n = burst number (1 - 8)
„ Scan count
Appends the number of reading attempts of the SR-750 Series while the timing
input is turned ON.
Failed reading operations are also counted.
• Data format
nnnnn = scan count (1 - 65535)
„ Position level
Appends the position level of the read code.
When several codes are read for one scan (multi read), the average of all code
position levels is output.
0 is appended when a reading fails.
• Data format
n = position level value (0 - 5)
Symbol ID Read data
Code type Detail Symbol ID
QR : Model 1 ]Q0
: Model 2, ECI not applied ]Q1
: Model 2, ECI applied ]Q2
: Model 2, ECI not applied, FNC1 (1st) ]Q3
: Model 2, ECI applied, FNC1 (1st) ]Q4
: Model 2, ECI not applied, FNC1 (2nd) ]Q5
: Model 2, ECI applied, FNC1 (2nd) ]Q6
DataMatrix : ECC 200 ]d1
: ECC 200, FNC1 (1st) ]d2
: ECC 200, FNC1 (2nd) ]d3
: ECC 200, ECI applied ]d4
: ECC 200, ECI applied, FNC1 (1st) ]d5
: ECC 200, ECI applied, FNC1 (2nd) ]d6
CODE39 No check digit validation ]A0
Check digit is validated and transmitted. ]A1
Check digit is validated but not transmitted. ]A3
ITF No check digit validation ]I0
Check digit is validated and transmitted. ]I1
Check digit is validated but not transmitted. ]I3
NW-7(Codabar) ]F0
JAN/EAN/UPC UPC-A, UPC-E, JAN/EAN13 ]E0
JAN/EAN8 ]E4
UPC-A, UPC-E, JAN/EAN13
Addon 2, addon 5 ]E3
CODE128 FNC1 not included. ]C0
FNC1 on the first digit (GS1-128). ]C1
FNC1 on the second digit. ]C2
GS1 Databar ]e0
Read data : nn
Read data : n
Read data : nnnnn
Read data : level = n