KEYENCE SR-750 Series - Manual (Page 35)

35 E SR-750 UM
The [Auto] screen
(1) Configuration procedure
Buttons to switch between [Auto] and [Manual] modes.
(2) Positioning
Laser-Aim … Activate the laser-Aim of the SR-750 Series.
Monitor … Displays the image output by the SR-750 Series.
Automatically measures reading rate at the same time.
Monitor Settings…Sets the display during monitor operation.
(3) Tuning
Tuning…Performs a calibration.
Tuning option … Sets the calibration method.
Tuning History… Displays the history of calibrations.
(4) Test
Reading test…Starts the reading rate test mode.
Tact test … Starts the read time test mode.
Bank
… Check to start the test mode using a bank selected at (8).
If not checked, the test mode is started with the Alternate function
activated.
(5) Monitor screen
Displays the image output by the SR-750 Series.
Dragging on the screen or operating the orange guide can restrict the tuning
range. The position of the restricted tuning range can be changes by further
dragging.
* Clicking the (7) "Full area" button can reset the restricted tuning range.
(6) Brightness adjustment bar
Adjust the brightness of the monitor screen.
(7) [Full area] button
Resets the decoding area restricted on the monitor, and returns the decoding
area to the full field of view.
(8) Parameter bank display window
Displays the current parameter bank settings.
(9) Camera status display window
Displays quick tuning status and test mode result values.
(5)
(1)
(6)
(7)
(2)
(3)
(4)
(8) (9)
Monitor Settings
„ Camera settings
(1) : Brightness adjustment mode
High quality mode…Adjusts the monitor
screen brightness with
easiness to view codes
prioritized.
High speed mode…Adjusts the monitor
screen brightness with
the (2) setting prioritized.
(2) : Exposure on high speed mode
Upper limit of exposure when capturing
images
(3) : Offset
Sets the offset value (brightness base
value).
Do not change normally.
(4) : Dynamic range
Sets the dynamic range when capturing images.
Setting range: Hi-Sensitivity/Hi-SNR, Hi-DR
„ Monitor Settings
(5) : Internal Lighting
Selects whether to use lighting of the SR-750 Series main unit.
(6) : External Lighting
Selects when using the external lighting. To interlock operation of the SR-750
Series with emission of external lighting, assign "EXT.LIGHT" to the output
terminal.
(7) : Displayed image
Selects the displayed image from images before filter-processed or images
after filter-processed.
(8) : Rotate image
Images output from the SR-750 Series can be rotated 180 degrees.
The direction for easy adjustment can be selected according to the mounting
condition of the SR-750 Series.
Tuning Options
Tuning tab
„ Camera settings
(1) : Camera settings
Same as for the monitor settings
„ Tuning Options
(2) : Tuning method
Normal........ Performs tuning without
image process filter.
Filter ........... Performs tuning with image
process filter.
(3) : Multi read
The multi read mode reads multiple
codes of the same type with one
parameter bank.
Multi read ... Check to enable multi read.
Set the number of codes to be read from 2 to 16.
Allow reduced detection count…
Check this to approve reading success even if the number of
codes read is less than the set number.
(4) : Rotate image
Disable ....... Searches black codes with white background.
Able ............ Searches white codes with black background.
Auto............ Searches automatically detecting the color (black/white) of code
and background.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
TEST TUNE SR-625
POW ERR
NET IN
STB
OK/NG/
In the standard condition, the switch side of the
SR-750 Series faces to the top.
Top
Bottom
(1)
(2)
(3)
(4)