3 autoid network navigator operation flow, 4 details of settings view, Camera] tab – KEYENCE SR-750 Series User Manual
Page 34: Autoid network navigator operation flow, Details of settings view
34
E SR-750 UM
Configuration
• Option window
Help
The Reader List
AutoID Network Navigator communicates with the connected SR-750 Series unit at
specified intervals. The indicator displayed to the left shows the status of
communications.
Operations that can be carried out on the reader list
The following operations can be carried out on the reader list.
• Click the indicator to change the status of communications between AutoID
Network Navigator and the SR-750 Series unit.
• When the mouse pointer is placed on any of the reader name, IP address, or
model, then the MAC address of that SR-750 Series unit will be displayed.
• Right-clicking on any of the reader name, IP address, or model will enable
selection of registration, deletion, or changing of configuration of the reader.
• These details can be selected from System in the menu bar.
• Double-click the IP address to specify the IP address of the connected reader.
• Used to change the SR-750 communicating with AutoID Network Navigator.
• Select Network Card : Selects a network card for the
PC to use with AutoID Network
Navigator.
• Options
: Click to open the Option
window.
•
: Sets whether to search
automatically a SR-750 Series
at the AutoID Network Navigator
startup.
• Clock Sync (SR-D100) : Not used with the SR-750
Series.
• Communication Timeout : Sets the communication
timeout for AutoID Network
Navigator to either 5 or 10
seconds.
•
: Select to display the terminal
together when Live View is
started.
• About : Displays the version information of AutoID
Network Navigator.
Lamp status
Description
Green SR-750 is registered in AutoID Network Navigator.
Blue
SR-750 is operating in AutoID Network Navigator.
* During operation, this will halt the command port
connection and data port connection with other
communication devices.
Gray
AutoID Network Navigator and SR-750 are not
communicating.
Red
An SR-750 formerly in communication can not be
recognized.
Check that the IP address has not changed, or that
the Ethernet cable has not been removed.
When communication is possible, the indicator will
automatically change to green.
Search Readers on
Application Startup
Terminal on Live
View Startup
5-3
AutoID Network Navigator
Operation Flow
The basic operation flow of AutoID Network Navigator is as follows:
5-4
Details of Settings View
This section describes details and operating methods in settings view for AutoID
Network Navigator.
[Camera] tab
The [Camera] tab has [Auto] and [Manual] methods for registering with the
parameter bank.
• Auto
: Mode for carrying out quick calibration of the SR-750 Series unit.
Click Positioning
→ Tuning → Test to automatically configure the
optimum settings.
• Manual : Enables quick configuration of details of reading settings that cannot
be configured in quick tuning.
This section explains details of this screen.
Select a reader to configure from the automatically searched readers. Or
register the reader to configure.
1
Configure the operation of the SR-750 Series
2
Send the configuration to the SR-750 Series
3
Perform a reading test
4
Save/print the configuration as necessary
5
Shut down AutoID Network Navigator
6