Measurement mode, Measurement mode -8 – KEYENCE IG Series User Manual
Page 66
4-2 Basic Settings and Advanced Settings
4-8
4
Setting V
a
ri
o
us
F
u
nct
ion
s
IG-E
A suitable measurement mode is set according to the shape of object and applications.
1. Measurement mode
Reference
When using modes other than the glass edge mode to measure small targets
or a transparent object, set the sensitivity setting to "High sensitivity mode ".
"4-3 Setting the Measurement Sensitivity" (page 4-44)
Measurement mode
Description
Default
value
Edge control/
Positioning mode
This mode is for the measuring of the distance from the
edge of the measurement range to the edge of a target.
"Edge control/Positioning mode" (page 4-9)
c
Outer diameter/Width
Measurement mode
This mode is for the measuring of the outer diameter or
width of a target.
"Outer diameter/Width measurement mode"
(page 4-10)
Inner diameter/
Opening
Measurement mode
This mode is for the measuring of the inner diameter.
Glass edge
mode
The operation is the same as the one for the "Edge
control/Positioning mode". Use this mode if the target is
transparent such as glass.
Pin position
Measurement mode
This mode is for the measuring of the distance from the
edge of the measurement range to the center of a
cylinder.
"Pin position measurement mode" (page 4-13)
Pin interval
judgment mode
This mode is for measuring the intervals (openings)
between pins of all objects accompanying multiple pins
lined up and judging if they are within the tolerance
range.
"Pin interval judgment mode" (page 4-14)
Pin diameter
judgment mode
This mode is for measuring the pin diameters of all
objects accompanying multiple pins lined up and judging
if they are within the tolerance range.
"Pin diameter judgment mode" (page 4-15)
Specified edges
interval
Measurement mode
This mode is for measuring the distance from one edge
to the other of a target. Specify the two edges for
measurement.