Holtgreven GSE-355 I.S. - Manual (Page 62)

53
Enables or disables the bargraph display on the LCD version of the Model 350/355 display. This setup
parameter only appears if an LCD display is installed. See Bargraph (General) on page 66.
P5012 Setpoint Bargraph Low-Limit Percentage (Key in)
Controls the "bargraph low-limit percentage" value for determining the weighting of each segment of the bar
graph. This only appears if an LCD display is installed. See Bargraph (General) on page 66.
P5100 Setpoint Operation (Selection)
Sets the desired Setpoint operation. Choose between None, ChecP, Fill, Batch, Discharge, Both, ChecA or
Independent. See General Setpoint Setup on page 63 for complete details on setpoint setup and operation.
Preset Transmit Selections
The Model 350 and Model 355 provide 14 preset formats for printing tickets or sending data to a computer. Only one
format or custom transmit may be enabled at a time.
Choice 0 Custom Transmit:
User-defined serial data string (see Custom Transmit Setup on page 55).
Choice 1 GSE Standard Transmit:
XXX.XX kg Gross
XXX.XX kg Tare
XXX.XX kg Net
HH:MM:SS am MM/DD/YY
Choice 2 Count:
HH:MM:SS am MM/DD/YY
XXX QTY
XX.X kg APW
XXX.XX kg Gross
XXX.XX kg Tare
XXX.XX kg Net
(
NOTE: The time and date will only be printed in choice 1 and 2 if P502 is enabled
).
Choice 3 (Condec Clone):
Where:
is a single control code, decimal value of 2.
is 8 characters, 1st character is either minus sign or a space, padded with leading spaces, with an embedded
decimal point.
is a single 'L' or 'K' character to indicate lb or kg units.
is a single 'G' or 'N' character to indicate gross or net data.
is an 'O' (overload/underload), 'M' (motion), or space otherwise.
is a single control code (carriage return), decimal value of 13.
is a single control code (line feed), decimal value of 10.
Choice 4:
Choice 5:
Choice 6: