Holtgreven GSE-355 I.S. - Manual (Page 56)

47
List of Parameters
The Model 350 and Model 355 have several parameters that can be configured to your specific application.
Below is a table of the available parameters. Also refer to page 48 for explanations of each parameter.
Table 11: Parameter Map
Parameter
Number
Display
Name
Default
Value
Valid Range/ Choices Parameter
Description
Page
P110.-- F.S.= 100.00 .01 – 999,999
(Keyed In)
Full Scale 48
P111.09 1Grad .01 .00001 – 500
(24 Selections)
Count By 48
P112.05 Ztrac 0.5d Off - 20.0d
(200 Selections)
Zero Track
Aperture
48
P114.10 Stabl 1.0d Off – 20.0d
(200 Selections)
Stability Window 48
P116.04 Filtr 1 Sec .065 – 8.00 Sec
(8 Selections)
Filter Setting 49
P117.01 Rate= 0.1 Sec 0.05 – 20.0 Sec
(201 Selections)
Display Update 49
P118.12 Zrang 100% .01 – 100%
(13 Selections)
Zero Button Range 49
P150.00 Units lb lb / kg
(Toggle)
Default
(Calibration) Units
49
P151.01 Unbut Enable Enable / Disable
(Toggle)
Units Button 49
P152.00 Unit3 None None / ounce / gram / lb oz
(4 Selections)
Additional Unit 49
P161.00 TarSa Disable Enable / Disable
(Toggle)
Tare Save 49
P166.01 AutoT Enable Enable / Disable
(Toggle)
Auto Tare 49
P169.00 AtClr Disable Enable / Disable
(Toggle)
Auto Tare Clear 50
P171.00 AnAlg Disable Enable / Disable
(Toggle)
Analog Output
Option
50
P179.00 Count Disable Enable / Disable
(Toggle)
Counting
Functions
50
P200.00 Baud 9600 150 – 9600
(7 Selections)
Comm Baud Rate 50
P201.01 Data 8 Bits 7 – 8 Bits
(2 Selections)
Comm Data Bits 50
P202.00 Par’y None None – Odd
(3 Selections)
Comm Parity 50
P203.00 Stop 1 Bit 1 – 2 Bits
(2 Selections)
Comm Stop Bits 50
P204.02 HndSh Soft None – Both
(4 Selections)
Comm Handshake 50
P210.01 Send Press Off – Cycle
(4 Selections)
Comm Transmit 50
P212.01 Stabl Delay Off – Delay
(Toggle)
Comm Motion 50
P213.01 TrTyp --1-- 0 – 13
(Selection)
Print Transmission 50
P250.00 RS485 Disable Enable / Disable
(Toggle)
Network Option 50
P251.00 Addr Disable Disabled and 4 – 254 (Key
In)
Network Address 51