Holtgreven GSE-355 I.S. - Manual (Page 15)

6
Key Press W EIGH M ODE Count Mode Setup Mode
"
Performs a gross zero function
and/or clears an entry in progress.
Hold this key on power-up to
turn on the display regardless
of P420.
Performs a quantity zero
function and/or clears an entry
in progress.
Exits the Setup Mode and/or
answers “NO” to query
prompts and/or clears an
entry in progress.
Performs a print function and/or
‘scrolls’ through digits during
setpoint entry. Performs a print function
and/or ‘scrolls’ through digits
during setpoint entry.
‘Scrolls’ through digits
during data entry.
2
Toggles between ‘lb’ and ‘kg’
and/or advances cursor to next
entry position. Toggles through standard
sample sizes and/or begins a
new sample entry. Advances cursor to next
entry position and/or cycles
prompts.
#
Performs an auto-tare function (if
enabled) and/or accepts an entry
in progress. If the tare weight is
known, key in the value and press
# .
Performs an auto-tare function
and requests a piece sample
and/or accepts an entry in
progress.
Accepts an entry in progress
and/or ‘scrolls’ through
parameter sub-set selections
and/or answers ‘YES’ to
query prompts.
!
Toggles between display modes
and/or restores power to the
indicator (if auto-shutoff
enabled). Toggles between display
modes and/or restores power to
the indicator (if auto-shutoff
enabled).
Advances to the next setup
parameter.
(
Performs a sample. If a number is
keyed in before hand, it will be
used as the sample size. Accepts
an entry.
Performs a sample. If a number
is keyed in before hand, it will
be used as the sample size.
Accepts an entry.
Clears an entry in progress. Hold
this key on power-up to turn on
the display regardless of P420. Performs a quantity zero
function and/or clears an entry
in progress.
Exits the Setup Mode and/or
answers “NO” to query
prompts and/or clears an
entry in progress.
Standard Functions
The Model 350 and 355 include built-in functions that you can enable through the Indicator Setup. for information on
the setup and operation of the following standard functions:
• Check-weighing
• Fill, two-speed, single ingredient
• Batch, three ingredients, single-speed
• Loss-in weight, two-speed emptying
• Independent setpoints
• Parts counting
• Remote key operation
• Selectable, built-in data transmission formats
• Custom data transmissions
Weigh Mode Functions
The Model 350 and 355 keypads have five primary Weigh Mode functions:
" Performs a gross zero and selects the gross mode.
Initiates data transmission out the communication port.