Holtgreven GSE-355 I.S. - Manual (Page 54)

45
3. Press 1 to save setup changes.
DISPLAY READS X Enter ~ =End
4. Press 1 to complete exit.
DISPLAY READS X 0.00
To exit the Setup Mode and save changes (355):
1. Press " to begin exiting Setup Mode.
DISPLAY READS X Enter ~ =CAL!
2. Press to bypass Calibration Mode.
DISPLAY READS X Enter ~ =Stor
3. Press ( to save setup changes.
DISPLAY READS X Enter ~ =End
4. Press ( to complete exit.
DISPLAY READS X 0.00
To exit the Setup Mode from the view-only mode (350):
1. Press to begin exiting Setup Mode.
DISPLAY READS X Enter ~ =End
2. Press 1 to complete exit.
DISPLAY READS X 0.00
To exit the Setup Mode without saving changes (350):
1. Press to begin exiting Setup Mode.
DISPLAY READS X Enter ~ =CAL!
2. Press to bypass Calibration Mode.
DISPLAY READS X Enter ~ =Stor
3. Press to exit without saving changes.
DISPLAY READS X Enter ~ =Undo
4. Press 1 to undo changes.
DISPLAY READS X Enter ~ =End
5. Press 1 to complete exit.
DISPLAY READS X 0.00