Holtgreven GSE-355 I.S. - Manual (Page 118)

109
To view the setup parameter selections (355):
1. From the Weigh Mode, press
!
.
DISPLAY READS X Setup~Enter ~ Code!
2. Press ( .
DISPLAY READS X -No- ~ Chgs!~P110.-- ~ F.S.= ~ 100.0
3. Navigate the Setup Mode as described in Setup Mode on page 40.
To exit the Setup Mode:
1. Press " .
2. Press ( .
Information Mode Parameters
A series of informational parameters are available beginning at P60000. These parameters may be accessed from the
Setup Mode, or from the Weigh Mode as described below. Table 29 gives an explanation of each information
parameter.
To access the informational parameters (350):
1. Press + .
DISPLAY READS X Setup~Enter ~ Code!
2. Press О О 2 О 1 .
DISPLAY READS X P60000 ~ E2Ins ~ 512
3. Navigate the Setup Mode as described in Setup Mode on page 40.
To access the informational parameters (355):
4. Press ! .
DISPLAY READS XSetup~Enter ~ Code!
5. Press ( .
DISPLAY READS X P60000 ~ E2Ins ~ 512
6. Navigate the Setup Mode as described in Setup Mode on page 40.
As each information parameter is accessed, the parameter number is briefly displayed, followed by the parameter name,
and finally the parameter value. To repeat the parameter number and name sequence, press ! . To exit the
information mode, press " .