Holtgreven GSE-355 I.S. - Manual (Page 12)

3
Wall Mount Kit Swivel bracket/stand for zinc die cast enclosure
Panel Mount Kit Mounts zinc die cast enclosure to user panel
Cutout: 7.33” – 7.45”w x 5.25” – 5.37”h x 2.25”d
186.2 – 189.2mm x 133.4 – 136.4mm x 57.2mm
Two Option Mount Kit Mounts up to two option boards inside the stainless enclosure
Battery Power Supply Kits Two versions: one mounts inside the stainless steel enclosure, the other mounts
Inside the die cast enclosure
Splash Shield Durable adhesive plastic that adheres to the front surface of the stainless steel
enclosure model
20 mA Current Loop Enables the communication port to be a digital 20 mA current loop port.
Display
The Model 350 and Model 355 indicators are available with either a six digit, 7-segment green LED display, a six digit,
7-segment black LCD display or a 7-segment backlit LCD display. The Model 350 and Model 355 will display
alphanumeric data, but due to the nature of 7-segment LEDs/LCD and the limitation of six digits, some information is
abbreviated.
All segments and annunciators are illuminated for a brief display test upon power up. The current gross weight is then
displayed in default units.
LED D
ISPLAY
The LED display is a six digit, 7-segment bright green LED screen with 12 annunciators to show weight and
status information. The SP1, SP2, and SP3 annunciators are red, green, and yellow. Also there is an annunciator
for a third unit under kg. Place the third unit label above the third annunciator (the third unit is available on both
the LED and LCD displays). See page 49 for third unit setup.
Figure 1: Model 350/355 LED Display
LCD D
ISPLAY
The LCD display is a six digit, 7-segment black LCD screen with 12 annunciators and a bargraph to show the
operational status.
Figure 2: Model 350/355 LCD Display