Holtgreven GSE-355 I.S. - Manual (Page 57)

48
Parameter
Number
Display
Name
Default
Value
Valid Range/ Choices Parameter
Description
Page
P410.-- Euro Disable Enable / Disable
9991/9990 (Key In)
OIML Enforce 51
P420.01 Dsply On Off – Auto
(3 Selections)
Display Function 51
P423.00 Backlight Off ON/OFF
(Toggle)
Backlight 51
P426.00 Batt Disable Enable / Disable
(Toggle)
Battery Option
annunciator
51
P427.00 Apo Off Off – Cycle
(15 Selections)
Auto Power for
Battery Option
51
P440.00 rStrc Disable Enable / Disable
(Toggle)
NTEP Enforce 51
P502.01 disbl
t-dAt
Disable Enable / Disable
(Toggle)
Time/Date
Function
51
P503.01 12 hours 12 hour 12 hour/24 hour Time/Date
Function
51
P504.00 Style U.S.A U.S.A or International Time/Date
Function
52
P505.01 TdSEL
disbl
Disable Enable / Disable
(Toggle)
Time/Date
Function
52
P800.00 R-But None None – Setpoint
(5 Selections)
Remote Button
Function
52
P1000.-- Cust. Trans -- -- Custom Transmit 51
P5010.00 SPAnn Enable Enable / Disable
(Toggle)
Setpoint
Annunciators
52
P5011.00 SPBar Disable Enable / Disable
(Toggle)
Bargraph Display 52
P5012.00 BarPc 50% 0 – 100
(Key In)
Bargraph Scaling 53
P5100.00 SetPt None None – Indep
(8 Selections)
Setpoint Operation 53
P
ARAMETER
M
AP
D
ETAILS
P110 Full Scale Value (Key in)
Denotes the full scale capacity. This value should not exceed the rated capacity of the weighing device.
P111 Division Size (Selection)
Indicates the count-by and decimal point. Pressing + 1 (Model 350) or (Model 355) will
automatically select the choice closest to 10,000 divisions without exceeding 10,000 divisions.
P112 Zero Track Aperture (Selection)
Set in terms of number of divisions. Zero tracking eliminates small weight deviations at or near zero. Weight
deviations within the selected window that have been stable for more than one second are tracked off,
maintaining a gross or net zero condition.
The sum of weight values zeroed with auto zero tracking and " cannot exceed the allowable zero range
(P118).
Truck scales commonly use zero tracking to compensate for snow fall. To determine the proper setting in a
counting application, divide the weight of the smallest product counted by the division size (P111). Zero Track
should be set to 0 (off) for most setpoint filling operations. This prevents tracking off any product trickle at the
start of a fill process.
P114 Stability (Selection)