Saving parameters – Holtgreven GSE-355 I.S. User Manual
Page 53
44
To enter a Key-In Parameter (355):
1. Key in the number by using the numeric keys.
2. Press
!
to accept the entry.
To setup a full scale value of 250 lbs (350):
1. Access the setup mode.
DISPLAY READS X P110.— — ~ F.S.= ~ 100
2. Press
four times to select the first digit.
DISPLAY READS X 2
3. Press
2
to advance to the next digit.
DISPLAY READS X 2.
4. Press
six times to select the next digit.
DISPLAY READS X 25
5. Press
2
to advance to the next digit.
DISPLAY READS X 25.
6. Press
once to select the next digit.
DISPLAY READS X 250
7. Press
1
to enter the value.
DISPLAY READS X P110.— — ~ F.S.= ~ 250
To setup a full scale value of 250 lbs (355):
1. Access the setup mode.
DISPLAY READS X P110.— — ~ F.S.= ~ 100
2. Key
in
!
to accept the entry.
DISPLAY READS X P110.— — ~ F.S.= ~ 250
Saving Parameters
To exit the Setup Mode and save changes (350):
1. Press
to begin exiting Setup Mode.
DISPLAY READS X Enter ~ =CAL!
2. Press
to bypass Calibration Mode.
DISPLAY READS X Enter ~ =Stor