Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual

Page 85

Publication 1757-IN032B-EN-P - April 2001

System Software Upgrade Procedures 1-65

d. Key in >default.stn< in the Auxiliary Setup File field.

6. Click OK to close the TCP/IP dialog box.

7. Click Save to open the Save Setup dialog box.

8. Key in >defaultb.stn< in the File name field and click Save.

9. Click Yes to replace the existing file, if applicable.

10. Click Cancel at the Unable to connect prompt, if applicable.

11. Click Station

⇒

Setup to call up the Station Setup dialog box.

12. Click the down arrow button in the Server Connection field and

select Network (TCP/IP).

13. Click Setup

in the Server Connection field to call up the

TCP/IP Setup dialog box. Make these entries:

a. Key in the name or IP address of the SERVERA (PLX1A) node

specified in the Hosts file in the Server Name field.

This function sets up the correct file reference for SERVERA on
the SERVERB node.

b. Select the Static option.

c. Key in >2< as the Station number.