Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 267)

Publication 1757-IN032B-EN-P - April 2001
Major ProcessLogix Software Components 8-7
Miscellaneous SCADA Component Revisions
Controller/Communication/I/O Firmware
See Table 2.A: Hardware component firmware revision level reference
for R320.0 on page 2-2.
Component Version Example Verification Mechanism
Modicon Netlib 2.1 1. Run NT Explorer.
2. Right click
\winnt\system32\netlib.dll
RSLinx 2.2 OEM 2.20.01
Build 119 1. Double click RSLinx icon.
2. Click Help \ About RSLinx.
3. Verify version information.
RSNetworx 2.25.12 1. Double click RSNetworx icon.
2. Click Help \ About RSNetworx.
3. Verify version information.
RSLogix 5 4.10 1. Double click RSLogix icon.
2. Click Help \ About RSLogix.
3. Verify version information.
RSLogix 5000 6.01 1. Double click RSLogix icon.
2. Click Help \ About RSLogix.
3. Verify version information.
S9000 Configuration
Tools
(1)
(1) CarbonCopy32 use with Series 9000 Tools: CarbonCopy32 should not be used with the Series 9000 Tools for
engineering purposes. Support for CarbonCopy32 is limited to use solely as a remote diagnosis/troubleshooting
tool. It has not been qualified as a remote operator/engineering interface for ProcessLogix. It has been reported
that it is not possible to remotely load a Data Table nor add any on-line ladder logic line/element to a running
Series 9000 when CarbonCopy32 is used. This appears to be related to CarbonCopy32’s special use of the Shift
key.
200.3
Siemens TF API for
Industrial Ethernet 2.0
RSBatch 2.1