Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 188)

Publication 1757-IN032B-EN-P - April 2001
5-2 Supplementary Procedures
Use the appropriate procedure that follows to remove a given
ProcessLogix software component. If you want to remove all the
components, remove them in the order shown.
Uninstalling ProcessLogix Knowledge Builder Software
Refer to Uninstalling ProcessLogix Knowledge Builder Software on
page 1-14.
Removing the ProcessLogix Server
1. Click Start
⇒
Programs
⇒
ProcessLogix Engineering
Tools
⇒
Uninstall ProcessLogix Update.
2. At the Uninstall ProcessLogix Update window, enter 1.
3. Click Start
⇒
Settings
⇒
Control Panel
.
4. Double-click the Add/Remove Programs icon.
5. Select PlantScape Server R300.0.
6. Click Add/Remove.
7. At the Welcome window, click Next.
8. At the Choose Setup Option window, check the Remove
ProcessLogix Server Software option and click Next.
ATTENTION
!
Before installing or uninstalling any software
component, you MUST exit all ProcessLogix
applications and stop all ProcessLogix services.
Refer to Stopping ProcessLogix Applications and
Services on page 1-8.
ATTENTION
!
Ensure that you have a copy of all the database files
before removing the ProcessLogix Server.
Removing the ProcessLogix Server destroys all data in
the Server database.