Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual

Page 27

Text mode
Original mode

Publication 1757-IN032B-EN-P - April 2001

System Software Upgrade Procedures 1-7

4. Key in this command in the Open entry field:

>cmd<

and click OK to open the DOS window.

5. At the DOS prompt, key in this command:

>fullbkup<

and press >Enter<

This initiates some file copying and then the backup dialog box
appears. No further interaction is needed until the backup
completes. This process may take considerable time to complete,
depending on the Server.

6. When the backup completes, remove the backup tape from the tape

drive.

7. Exit the DOS window.

TIP

For more information on backup procedures, refer
to the Windows documentation and/or online help
that accompanied your system.

TIP

You may see errors such as: “file xxx skipped”.
These errors are normal and will not affect the
validity of your backup tape.