Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual

Page 48

Text mode
Original mode

Publication 1757-IN032B-EN-P - April 2001

1-28 System Software Upgrade Procedures

5. Confirm that the floppy drive letter A:, for example, appears in the

From Drive field and the hard drive letter C:, for example, appears
in the To Drive field in the dialog box.

6. Click OK to initiate the move.

7. Click Move to move the file to the hard drive. Wait for a dialog box

to give a successful move indication, and click OK to exit.

8. Remove the Master Disk from your floppy drive and store it in a

safe place

TIP

If you need to reformat the hard drive, you must first
move the evrsi.sys file back to this Master Disk using
this same general procedure; otherwise, the file will be
corrupted.