Verifying processlogix client installation, Things to consider after the installation, Verifying processlogix client installation -83 – Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual
Page 103: Things to consider after the installation -83

Publication 1757-IN032B-EN-P - April 2001
System Software Upgrade Procedures 1-83
24. Skip this step if the system does not include Excel Data Exchange.
Otherwise, click Enable Macros when requested.
25. At the Setup Complete window, click the No, I will restart my
computer later option and click Finish.
26. The ProcessLogix Engineering Workstation Update is
automatically installed. At the ProcessLogix Setup Complete
window, click the No, I will restart my computer later option and
click Finish.
27. Remove the CD.
28. Restart the PC.
29. Go to Verifying ProcessLogix Client Installation on page 1-83.
Verifying ProcessLogix
Client Installation
Things To Consider After The Installation
The following table summarizes some items that should be checked
before you begin operating your ProcessLogix Client.
TIP
If a Microsoft Excel dialog box appears, check the Do
not show this dialog again checkbox and click OK.
Check this.
Because.
Custom Displays
•
If the
C:\Honeywell\client\abstract directory was not created,
use Windows NT Explorer to create an
abstract folder in the
C:\Honeywell\client directory.
Station
Configuration File
•
The original station.ini file is renamed old_station.ini and is
replaced by a new station.ini in the
C:\WINNT directory. Any
changes made to the original file (old_station.ini) need to be
made to the new file (station.ini).
•
The old default.stn file in the C:\Honeywell\client\station directory
will be overwritten. Any changes made to the original file will
need to be made to the new file.
Station Menu
•
A new Station menu (menu.txt) is installed. This means any
configurations made to the original Station menu will be lost and
will need to be reconfigured for the new Station menu through
Station.