Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 245)

Publication 1757-IN032B-EN-P - April 2001
Performance and Capacity Specifications 7-5
Server configuration memory allocations assume Server services only.
Station Client memory usage already includes the ProcessLogix Client
Applications. However, most applications can be run on either the
Servers or Station Clients. On small to medium systems, these
applications may be run on the Server Platforms. On large systems, the
Servers should be dedicated to running only the Server Services. On these
systems, when possible, all applications should be run from the Client
stations.
Using the Platform Requirement’s Table as a base for memory usage, add
on the memory requirements for each of the applications from the table
below intended to be used on a regular basis. (See Note 3.)
Table 7.E High Performance Platform Requirements
High Performance Platform Requirements based on System Configurations
Server Station
System
Configuration Small Medium Large Small Medium Large
Processor 400 MHz
Pentium II 550 MHz
Pentium III 800 MHz
Pentium III or
Larger
*Note 10 266 MHz
Pentium II 300 – 400
MHz Pentium
II 550 MHz
Pentium III or
Larger
RAM
•
Win 95/98 -- -- -- 64 MB 64 MB 96 MB
•
Win NT 4.0
Workstation 160 MB 224 MB 256 MB 96 MB 96 MB 128 MB
•
Win NT 4.0
Server 192 MB 224 MB 320 MB -- -- --
Video Resolution
(Note 2)
1024 x 768
65K colors 1024 x 768
65K colors 1024 x 768
65K colors 1024 x 768
65K colors 1024 x 768
65K colors 1024 x 768
65K colors
Hard Drive 4.3 GB 4.3 GB 9.1 GB 4.3 GB 4.3 GB 4.3 GB
TIP
Failure to add additional memory may result in
degradation of system performance.