6 - new functions and features, Processlogix system, Ethernet supervisory network – Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide User Manual
Page 217: Ccl installation, Chapter 6, Processlogix system -1, New functions and features, Chapter
![background image](/manuals/579520/217/background.png)
1
Publication 1757-IN032B-EN-P - April 2001
Chapter
6
New Functions and Features
ProcessLogix System
Ethernet Supervisory Network
A 10 megabit Ethernet module is being added to the system for use as
the Supervisory Network between the ProcessLogix Server and
1757-PLX52 Controllers. This feature requires an Ethernet module
(1756-ENET/A)
to be placed in the Controller chassis. In this release,
1757-PLX52 Controller Redundancy is not supported in the presence
of an Ethernet Supervisory Network because the Ethernet Interface
module is not redundancy capable.
CCL Installation
ProcessLogix CCLs (Control Component Libraries) are collections of
Function Blocks. The Function Blocks in Control Component Libraries,
when installed to the Engineering Repository and subsequently loaded to
the Controller, appear and behave the same as other ProcessLogix
Libraries and Function Blocks.
CCLs:
•
can be installed to ProcessLogix Systems and loaded to
ProcessLogix Controllers after initial installation, independent of
release, and while the System and Controller are online.
•
contain Function Blocks created for a specific use or for a
specific industry. Thus, customers can use CCLs to further tailor
ProcessLogix Controllers to their individual needs.
•
provides the first customer-visible part of the evolving
underlying infrastructure supporting this functionality
•
allows customers to install new Function Block functionality into
their online ProcessLogix Systems.
•
specific CCLs are under development
•
none are shipped with the R320 release