Rockwell Automation 1757-SWKIT3200 ProcessLogix R320.0 Installation and Upgrade Guide - Manual (Page 72)

Publication 1757-IN032B-EN-P - April 2001
1-52 System Software Upgrade Procedures
8. Skip this step if the system does not include Excel Data Exchange.
Otherwise, click Enable Macros when requested.
9. At the Setup Complete window, click the No, I will restart my
computer later option and click Finish.
10. The ProcessLogix Server Update is automatically installed. At the
ProcessLogix Setup Complete window, click Finish.
11. Remove the CD.
Setting Up User Accounts
Configure the plx_user, mngr, and erserver accounts.
Refer to Setting Up User Accounts on page 5-27.
TIP
If a Microsoft Excel dialog box appears, check the Do
not show this dialog again checkbox and click OK.
TIP
If a Read only File Detected message appears during
software installation, check the Don’t display again
checkbox and click Yes to acknowledge the message.
IMPORTANT
If the message “Dr. Watson has been installed as default
application debugger,” appears during software
installation, click OK.
IMPORTANT
Do not restart the Server!
Before restarting the PC, you must have all user
accounts configured correctly.
IMPORTANT
Do not restart the Server at this time. Continue with
the next section.