3 - processlogix server installation procedures, Processlogix software installation on a clean pc, Chapter 3 – Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 63: Processlogix server installation procedures, Chapter

1
Publication 1757-IN510A-EN-P - October 2003
Chapter
3
ProcessLogix Server Installation Procedures
ProcessLogix Software
Installation on a Clean PC
Rockwell Automation delivers the ProcessLogix Server with all the
required software pre-installed. The following instructions can be
used if the system has to be reinstalled or for new installations on a
PC that was not purchased from Rockwell Automation.
The following table lists the items that you
MUST complete to install
the ProcessLogix software. If you are installing ProcessLogix software
on a redundant Server pair you must complete the items on
SERVERA
then repeat the same items on
SERVERB.
IMPORTANT
If you purchased a new ProcessLogix R510.0 Server
from Rockwell Automation, the operating system and
ProcessLogix software have already been installed.
Do not r einstall the softwar e. Refer to the
ProcessLogix R510.0 Server Installation Instructions,
publication 1757-IN951 shipped with your hardware.
Table 3.A ProcessLogix Software Installation on a Clean PC
✔
Step
Item
Page
1 .
Clean System Windows 2000 Server Installation
2.
Creating the ProcessLogix User Accounts
3.
Windows 2000 Service Pack 4 Installation
4.
Windows Security Hotfix Installation
5.
Internet Explorer 6.0 SP1 Installation
6.
7.
8.
Additional Operating System Customization Procedures
9.
Creating Emergency Repair Disks
1 0.
1 1 .
Installing ProcessLogix R510.0 Software
1 2.