Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 53)

Publication 1757-IN510A-EN-P - October 2003
Operating System Installation Procedures 2-33
Internet Explorer 6.0 SP1
Installation Checking the Internet Explorer Version
All systems are required to use Internet Explorer 6.0 SP1. Complete
the following steps to determine the version of Internet Explorer that
is installed. If you have a redundant Server pair, you must complete
this procedure on both
SERVERA and SERVERB.
1 . If necessary, logon to the system.
2. Start Internet Explorer.
TIP
If this is the first time starting up since the Windows
2000 operating system install, it is necessary to
remove the default startup screens. Refer
to Removing the Default Startup Screens on
page P-4.
IMPORTANT
If this is the first time running Internet Explorer on
Windows 2000, the Internet Connection Wizard
opens.
An internet connection is not required for this
function or ProcessLogix software use. However,
components in the software are required.
Fill in the appropriate information if known,
otherwise follow the steps listed here:
a. Select the I want to setup my Internet connection
manually option and click Next.
b. Select the I connect through a local area network
(LAN) option and click Next.
c. Click Next at the local area network internet
configuration window.
d. Select the No option for setting up an Internet Mail
Account and click Next.
e. Click Finish.
f. If you do not have an Internet connection, you receive an
error attempting to download the page. Click Work
Offline.