Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 185)

1 Publication 1757-IN510A-EN-P - October 2003
Chapter
7
Firmware Maintenance Procedures
1784-PCIC Driver
Installation If you are using ControlNet for your Supervisory Network, you must
have a 1784-PCIC card installed in each Server. Refer to the 1784-PCIC
Installation Instructions, Publication 1784-IN003. If you have not yet
configured your 1784-PCIC card device drivers, a Found New
Hardware Wizard opens after each restart.
Install Hardware Device Drivers
1 . Restart the PC.
2. Logon as ps_user.
3. If the Found New Hardware Wizard opens, skip to step 8. If the
Found New Hardware Wizard does not open, continue with the
next step.
4. Right-click the My Computer icon and select Manage.
5. Select Device Manager.
6. Under Other Devices, right-click the PCI device and select
Pr oper ties.
7. On the Driver tab, click Update Dr iver.
8. Click Nex t.
9. Select the Sear ch for a suitable dr iver option and click Nex t.
1 0. Uncheck the Floppy disk drives and the CD-ROM drives
checkboxes.
1 1 . Check only the Specify a location checkbox and click Nex t.
1 2. Insert the ProcessLogix R510.0 Application Software CD into the
CD-ROM drive.