Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual
Page 174

Publication 1757-IN510A-EN-P - October 2003
6-14 Additional Redundant Server Procedures
b. To add a directory, click
Add, click
, select the directory,
and click
OK.
8. Click Save.
9. Click Yes to save the new connection.
1 0. Enter >defaultb.stn< in the File name field and click Save.
1 1 . Select defaultb and click Connect.
1 2. Click Cancel at the Unable to connect prompt, if applicable.
1 3. Click Station
⇒ Connect to call up the Station Connect dialog
box.
1 4. Select Default and click Edit Connection.
1 5. On the Connection tab, make these entries to have the Station
point to
SERVERA (PLX1 A):
a. In the Server field, enter or
Br ow se to the Primary Server
name
SERVERA.
b. Select the Station type as
Static Station.
c. Enter >1< as the Static Station Number and click
Advanced.
d. Check the
Aux iliar y setup file checkbox.
e. Click
Br owse and navigate to:
C:\Honeywell\Client\Station\defaultb.stn and click
Open.
1 6. Click Save.
1 7. Click Yes to save changes.
1 8. Select Default and click Connect.
1 9. Click Cancel at the Unable to connect prompt, if applicable.
TIP
Display Sear ch Path Optimization
You can improve Station’s performance by
unchecking the Search subdirectories for shapes
checkbox in the Connection Properties dialog box,
and then explicitly defining each subdirectory that
contains displays.
IMPORTANT
You must indicate the full path to the .stn file.