Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 119)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Server Upgrade Procedures 4-35
Restoring ProcessLogix
Data Each of the following items should be considered before proceeding.
Table 4.J Restoring ProcessLogix Data Considerations
Item Post-upgrade
Folders and Files Copy backed up folders and files from the backup Server
directory to c:\Honeywell\Server after the system is
upgraded.
Custom Displays may require modification for use in an
R510.0 system.
Custom Displays Custom displays may require modification for use in an
R510.0 system. Copy backed up displays from the backup
abstract directory to C:\Honeywell\Client\abstract.
System Displays You must reapply the changes to the new display after the
upgrade.
Station Menus You must reapply the changes to the new menus after the
upgrade.
System Acronyms You must reapply the changes to the new set after the
upgrade.
Scan Periods You must reapply the periods after the upgrade.
Localization You must reapply the settings after the upgrade.
Station configuration file You must reapply the changes to the new station.ini file after
the upgrade.
Station setup file The new default setup file, default.stn, is configured as
“static Station 1”. If this is not correct, you must make the
appropriate changes via Station’s Setup menu.
Navigate in Knowledge Builder to Server and Client
Configuration Guide
⇒
Configuring Stations and
Printers
⇒
Setting Up Station for more information.
History archive search path After upgrading, you must specify the history archive search
path using the ProcessLogix Server Control Panel.
Navigate in Knowledge Builder to Server and Client
Configuration Guide
⇒
Understanding and Configuring
Points
⇒
History Collection and Archiving
⇒
History
Archiving for more information.
Custom applications Custom applications must be re-compiled and re-linked using
an appropriate development environment.
Navigate in Knowledge Builder to Application Development
Guide
⇒
About the Development Environment
⇒
Compiling, Linking, and Editing for more information.
Quick Builder projects When opening an old project file with the new version of
Quick Builder, you are prompted to migrate the project file to
the new format.
File dumps Do not use any file dumps of the pre-upgrade database to
restore the upgraded database.