Copying r320.0 data to the r510.0 server, Networking the r320.0 and r510.0 servers, Copying r320.0 data to the r510.0 server -29 – Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide User Manual

Page 113: Networking the r320.0 and r510.0 servers -29

Publication 1757-IN510A-EN-P - October 2003

ProcessLogix Server Upgrade Procedures 4-29

3. Enter this path or Br owse to:

>A:

(or your floppy drive letter)

\EVMOVE.EXE<

4. Click OK to launch the move executive.

5. Verify that you are Moving Activations From Drive C:

(or your hard

drive letter)

to Drive A:

(or your floppy drive letter)

6. Click OK to initiate the move.

7. Click Move to move the file to the floppy.

8. Wait for a dialog box to indicate a successful move, and click

OK.

9. Close EvMove.

1 0. Remove the Master Disk and store it in a safe place.

Preparation for a ProcessLogix R320.0 to R510.0 Server Upgrade is
complete.

Return to the checklist that led you to this task.

Copying R320.0 Data to the
R510.0 Server

Networking the R320.0 and R510.0 Servers

Use the following procedure to map a drive to the new R510.0 Server.

1 . Logon to the R320.0 Server as plx_user.

2. Click Star t

⇒ Run.

3. Enter >cmd< and click OK to open the DOS window.