Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 143)

Publication 1757-IN510A-EN-P - October 2003
ProcessLogix Client Installation and Upgrade Procedures 5-17
a. Click on the appropriate program in the list of installed
programs.
b. Click Add/Remove, Change/Remove or Remove.
c. Click Yes to confirm removal.
d. Repeat the steps for each installed component in the
following order.
IMPORTANT
Be sure to remove the components, if installed, in
the order they are listed below.
If at any time during software uninstall, a Remove
shared file prompt appears, click
Yes to all or
Remove all.
If necessary, click OK or Yes to confirm.
If you see an Uninstall successfully completed
message, or a message stating some elements were
not removed, click
OK.
If a delay occurs during uninstall, verify that there
are no hidden Remove Programs windows in the
taskbar.
Table 5.N Removing Selected R400.0 SP2 Components
✔
Order Component
1 . ProcessLogix SP2 Update or ProcessLogix SP2 Operator Workstation
Update
2. Engineering Tools R400.0 SP2 Option
(Engineering Workstation only)
3. Engineering Tools R400.0 SP2
(Engineering Workstation only)
4. ProcessLogix - R400 SP2
5. ProcessLogix Update or ProcessLogix Operator Workstation Update
6. OPC Server Connect 400.0
7. TPS - HCI Runtime
8. Server System Displays
9. PlantScape Server ODBC Client 400.0
1 0. Microsoft Excel Data Exchange 400.0
1 1 . HMIWeb Station and Display Builder
1 2. Network API 400.0
1 3. Quick Builder
1 4. VBScript Documentation