Rockwell Automation 1757-SWKIT5100 ProcessLogix R510.0 Installation and Upgrade Guide - Manual (Page 31)

Publication 1757-IN510A-EN-P - October 2003
Operating System Installation Procedures 2-11
Clean System Windows
2000 Professional
Installation Windows 2000 Professional is the preferred Client operating system
for ProcessLogix R510.0. The current required operating system
components are:
• Windows 2000 Professional with Windows 2000 Service Pack 4
• Internet Explorer 6.0 SP1
The Windows 2000 Professional software, Service Packs, and Internet
Explorer are licensed products of Microsoft Corporation. Copies of the
Service Packs and Internet Explorer are included on the ProcessLogix
CDs for your convenience.
Installing Windows 2000 Professional on a New System
This procedure assumes you have:
• All network cards installed in the PC and set to the correct IRQs.
• All supporting ProcessLogix System hardware installed and
connected to the PC.
• A PC that meets specified hardware and software requirements.
See Table 11.B: Client Platform Requirements based on System
Configurations on page 11-3 to review the ProcessLogix Client
platform requirements.
• All manufacturers’ related driver diskettes available to complete
the installation.
TIP
Consult the PC Manufacturer for any specialized
instructions/procedures related to the installation of
the Microsoft Windows 2000 Professional operating
system.
This procedure lists only the generic installation
procedure. It does not contain any special
instructions for any manufacturer specific driver
installation requirements.