Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 76)

Publication 1758-UM002D-EN-P - October 2010
76 DataSite Configuration Settings Utility (DS Settings)
Configure Event Settings Use Event Settings to configure these four types of RTC interruption events.
• System events
• Alarm events
• Calendar events
• Time events
Configuring these events in the Event Settings dialog box is equivalent to
programming the corresponding function blocks in DataSite Workbench:
• System events: EV_SEC_CFG
• Alarm events: EV_CLK_CFG
• Calendar events: EV_CALE_CFG
• Time events: EV_TIME_CFG
For more information on using these function blocks, refer to the Customized
Function Blocks for DataSite Reference Manual, publication
1758-RM001 .
Follow this step to open the Event Settings dialog box.
• From the Tools menu, choose Event Settings.
The Event Settings dialog box appears. The file, Event Parameter.evt,
located in current project directory, is displayed on project browser file
pane.
TIP
You can also double-click the Event Parameter.evt file in
the project browser file pane to open the Event Settings
dialog box.