Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 192)

Publication 1758-UM002D-EN-P - October 2010
192 DataSite Flow Configuration Utility (DS FloConfig)
Follow these steps to reset all the AGA flow parameters to their default values.
1. Set the controller into the Service mode.
2. Select the AGA Parameter Initialization check box.
3. Click Set.
The new settings are downloaded to the controller.
4. Click Run, and exit the service mode.
CH4 0.965222
N2 0.002595
CO2 0.005956
C2H6 0.018186
C3H8 0.004596
H20 0
H2S 0
H2 0
CO 0
O2 0
iC4H10 0.000977
nC4H10 0.001007
iC5H12 0.000473
nC5H12 0.000324
nC6H14 0.000664
nC7H16 0
nC8H18 0
nC9H20 0
nC10H22 0
HE 0
AR 0
Pulse Cutoff 0
Default values of AGA flow parameters (Continued)
Parameter Name Default Value