Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 121)

Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 121
Configure FLO RTC Settings The FLO RTC settings allow you to read the real-time clock (RTC) of the
DataSite controller, calibrate the RTC, and set the contract time.
Open the FLO RTC Dialog Box
Follow this step to open the FLO RTC dialog box.
• In the configuration tree, click FLO RTC.
Read the Real-Time Clock
Follow these steps to read the RTC.
1. Under FLO Time, if you want the time to be read continuously, select
the Continuously check box.
2. Under FLO Time, click Read.