Hardware and software requirements – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 14

Publication 1758-UM002D-EN-P - October 2010
14 DataSite Configuration Settings Utility (DS Settings)
This function lets you initialize the DataSite controller back to factory
defaults.
•
HART Settings
This function lets you configure and send HART commands.
Hardware and Software
Requirements
To install DS Settings, you need the following:
•
an IBM-compatible PC with at least a 80486 microprocessor
(Pentium-166 and above),
•
a CD-ROM drive,
•
at least 70 MB of free hard disk space,
•
at least 32 MB of memory (64 MB recommended),
•
a VGA graphic card, and
•
Windows NT 4.0, Windows 2000, or Windows XP Professional.
This manual is related to the following products: