Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 112)

Publication 1758-UM002D-EN-P - October 2010
112 DataSite Flow Configuration Utility (DS FloConfig)
Configure PC
Communication Settings The DataSite controller can be connected to the PC via the serial port or the
Ethernet (TCP/IP) port. Use PC Communication settings to set up the
communication mode and parameters for this connection.
Open the PC Communication Dialog Box
Follow this step to open the PC Communication dialog box.
• In the configuration tree, click PC Communication.
Set Up PC Communication
Follow these steps to set up the PC communication.
1. From the Type Select pull-down menu, choose the type of
communication port used between the PC and the DataSite controller:
• For Ethernet communication mode, choose UDP.
• For Serial port communication mode, choose one of the COM ports
(COM1…COM10).