Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 177
Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 177
This table provides a list of parameter modification events and their
descriptions.
Descriptions of parameter modification events
Parameter
modification event
Condition
Meter Run
When the meter run is enabled or disabled.
Unit Type
When the unit type (U.S. or Metric) is changed.
Accumulate
When the flow meter is set to start or stop accumulation.
Automatic Components When the Automatic Components option is selected or
deselected.
AGA Standard
When the flow calculation standard is changed.
AGA8 Method
When the compressibility calculation method is changed.
Calculation Interval
When the calculation interval is changed.
BMP (Base Multiplier
Period)
When the BMP is changed.
Base Pressure
When the base pressure is changed.
Base Temperature
When the base temperature is changed.
DP Cutoff
When the differential pressure cutoff is changed.
Pressure Type
When the pressure type is selected.
Atmospheric Pressure
When the atmospheric pressure is changed.
Static Pressure Tap
Location
When the location of pressure tap is selected.
Orifice Material
When the orifice plate material is selected.
Orifice Diameter
When the diameter of the orifice plate is changed.
Orifice Measurement
Reference Temperature
When the orifice measurement reference temperature is
changed.
Tube Material
When the tube material is selected.
Tube Diameter
When the diameter of the tube is changed.
Tube Measurement
Reference Temperature
When the tube measurement reference temperature is changed.
Relative Density
Condition Type
When the relative density condition type is set as “Real” or
“Ideal”.
Relative Density
When the relative density is changed.
Reference P for
Relative Density
When the reference pressure for relative density is changed.
Reference T for
Relative Density
When the reference temperature for relative density is changed.
Gas Heating Value
When the gas heating value is changed.
Reference T for Gas
Heating Value
When the reference temperature for the gas heating value is
changed.
Pressure Register
When the pressure register is changed.